 |
|
|
|
|
 |
|
 |
Branson immersible transducers provide versatile ways to add
ultrasonics to new or existing tankage in a variety of industrial
settings. Type 316L bright annealed stainless steel construction
permits use of a wide range of cleaning chemistries. Hard chrome is
offered as an option in severe applications. The hermetically sealed
immersible transducers are available in two standard sizes and four
mounting configurations. This allows for maximum versatility of
transducer placement on tank walls or bottom to optimize cleaning. This
selection is supplemented by our fabricating capability for custom
sizes. The standard 40kHz transducer is capable of being driven by 40,
80, 120 or 170kHz - providing you with the ultimate in flexibility.
Branson offers either piezoelectric or magnetostrictive technology in
its immersible transducers. Both types offer excellent energy
conversion, stable performance under all operating conditions, and are
guaranteed for the life of the system. Piezoelectric transducers are
offered in multiple frequencies from 25 kHz to170 kHz. Generally lower
frequencies are preferred for large, massive parts while higher
frequencies are for more intricate parts and small particle removal.
Magnetostrictive transducers are offered at 20 kHz and are best used
where high power or focused energy is needed.
- A variety of junction box and cabling schemes for easy installation and maintenance.
- Hastalloy C for corrosive chemistries
- Hard chrome or titanium nitride coatings for extreme wear applications.
Each group of Branson immersible transducers must be served by a power supply operating at the same frequency (20, 25, or 40 kHz) and rated for the same number of transducer elements.
Branson offers three transducer configurations - FC, EB, and CB - which vary according to their mounting means and electrical connections:
Type FC
The most versatile type; does not require holes in the tank. May be
side or bottom mounted using integral mounting flanges. Watertight 3'
lead cables included. Special lengths available; also right-angle
fitting for tight radius turns. |
Type EB
 For bottom-mounting, especially where undertank clearance prevents use of type SB. May be affixed to tank bottom, using integral mounting flange. Standard 1¼" mounting fitting supplied; other lengths available. |
Type CB
For side-mounting; most commonly only in high-power applications. One
or two bulkhead fittings, depending on transducer size. Supplied with
8' RF cable, which allows master junction box to be remotely located.
Special length cables available. |
|
Model 610-6 |
Model 618-12 |
Custom |
| Working Dimensions |
6"W x 10"L x 3.25"H |
6"W x 18"L x 3.25"H |
Special sizes available on request. |
| Number of Transducers |
6 |
12 |
Various |
| Frequencies Available |
25 kHz
40 kHz
80 kHz
120 kHz
170 kHz
|
25 kHz
40 kHz
80 kHz
120 kHz
170 kHz
|
25 kHz
40 kHz
80 kHz
120 kHz
170 kHz
|
|
|
|
|
|
|
|
|
