Industrial Cleaning: Home [ Branson Ultrasonics - Plastic Joining - Precision Cleaning

Industrial Automation Divisions:


		Branson Home • About Branson • Careers • Contact Us • Site Map

ULTRASONIC VAPOR DEGREASER

OVERVIEW

The Branson B252R Ultrasonic Vapor Degreaser is one of a series of environmentally sound, cost effective precision degreasers. It integrates state-of-the-art controls with maintenance practicality and small footprint in a standard ultrasonic vapor degreaser. It incorporates all of the important environmental and safety features typically found in larger units. All controls are clustered on a compact front-mounted digital control panel. The B252R features an offset boiling chamber to reducing the solvent/air interface reducing solvent emissions and footprint. It is ideal for use with traditional solvents like trichloroethylene and methylene chloride, as well as many of the newer materials including HCFC, HFC, HFE, n-propyl bromide, AK-225, and more.

With a 4.8 gallon solvent capacity, the compact B252R is ideal for use at individual production work stations or as a tool to develop processes for larger equipment

ENVIRONMENTAL FEATURES

The B252R is designed to comply with EPA environmental regulations on solvent emissions, an important environmental and economic consideration. Some of these features also facilitate OSHA compliance. The unit includes, as standard, a number of engineered improvements designed specifically to minimize solvent losses. The following list details some of these more important features:

Freeboard ratio of 100% to minimize diffusion losses due to drafts
Peripheral condensing coil to efficiently condense solvent vapors minimizing emissions.
Captured sliding cover to eliminate drafts and help seal the unit during periods of inactivity.
Offset boiling chamber to reduce solvent air interface to below 1 ft2
Recirculating pump and cartridge filter to remove particulate and extend solvent life

SAFETY FEATURES

In addition to the benefits associated with keeping solvent away from the operator, the B252R has many other features which contribute to safety and reliability. Key among these are:

Low voltage controls for operator safety
"Ready" light to assure the unit is set to run
High vapor level sensor to prevent solvent boil off.
Coolant flow indicator assures flow through the condensing coils
Low solvent sensor to prevent heater damage
Boil sump temperature indicator
Early warning contamination indicator to signal the need for solvent replacement

MAINTENANCE
All maintenance procedures can be performed from the front or top of the unit. All services also enter conveniently from the front.

STANDARD FEATURES

24 volt controls for safety
Digital temperature readouts
40 kHz industrial ultrasonics
304 Stainless steel construction
Full peripheral cooling coils
One year warranty

OPTIONS

Desiccant dryer kit for azeotropic solvents
Stainless steel mesh baskets
Vertical lift mechanism with power cover

SPECIFICATIONS

Total solvent capacity:	4.8 Gallons
Boil tank heat:	1200 watts
Distillation rate based on HFC/HFE:	5.5 gph
Load capacity (steel):	80 lbs./hr
Cooling ½ HP compressor :	0.75 gpm
Power requirements:	208/230v, 60 Hz,1 ph, 16 amps

Dimensions
Ultrasonic tank:	8" x 10" x 6"D
Vapor zone:	10.5" x 12.5" x 6"D
Overall:	22" x 22" x 40" high

| Home | | Industrial Cleaning | | Sonic Components | | Aqueous Systems | | Solvent Systems |
| Liquid Processing | | Industrial Segments | | OEM Solutions |
| Terms & Conditions of Sale | | Website Terms & Conditions |

Branson is an Equal Opportunity Employer

Branson Ultrasonics Corporation, 41 Eagle Road, Danbury, CT. 06813-1961 USA
Phone: 203-796-2298 ~ Fax: 203-796-0320~ E-mail info@bransoncleaning.com
©1998 Branson Ultrasonics Corporation, All rights reserved worldwide.

Last update: 8/6/2007 10:58:32 AM

Problems with the website? Contact the Webmaster at webmaster@bransonultrasonics.com