 |
|
|
|
|
 |
|
 |
OVERVIEW
 The Branson B-Series Ultrasonic Vapor Degreaser is the latest in a series of environmentally sound, cost effective precision degreasers. Branson, well known for ultrasonics,is also the global leader in solvent cleaning technology.The B-Series integrates over 55 years of degreasing experience with the demanding needs of a changing marketplace to offer you a functional solvent solution to your cleaning needs. Similar in operation to a traditional two sump unit, they incorporate all of the important environmental and safety features you need, including two onboard compressors for both primary and sub-zero cooling and 40 kHz ultrasonics. All controls are clustered on a compact front-mounted 24 volt digital control panels. The B-Series is ideal for use with most commercially available vapor degreasing solvents.
FEATURES:
- Freeboard ratio of greater than 120% to eliminate diffusion losses
- Refrigerated primary condensing coil to condense the bulk of the solvent vapors
- Refrigerated sub-zero freeboard condenser to provide a cold air barrier minimizing fugitive losses
- Sliding cover to eliminate drafts and help seal the unit during periods of inactivity.
- Offset boiling sump with liquid level control (except on B452R)
- Bag filter to minimize solvent loss during maintenance
- Cooled internal water separator to reduce losses
- Stainless plumbing for solvent-wetted areas
SAFETY FEATURES
In addition to the benefits associated with minimizing solvent losses the B-Series degreasers have many other features which contribute to safety and reliability. Key among these are:
- Low voltage controls for operator safety
- "Ready" light to notify operator the unit is set to run
- Coolant indicator gives visual confirmation the refrigeration is functioning
- High vapor level sensor to prevent solvent boil off.
- Heat Over Temp sensor to prevent heater damage
- Early warning contamination indicator to signal the need for solvent replacement
- Temperature control of ultrasonic sump (except on B452R)
- Lift off skirt panels to facilitate maintenance
OPTIONS
- PLC-controlled vertical & dual axis lift (B452 & B950)
- Split power cover
- TDR interface
- Desiccant dryer
- 460 V (B1950 & B3550)
- Stainless steel mesh baskets
- Water cooled compressors for cleanroom installations
- High frequency ultrasonics - 80 to 170 kHz
OVERVIEW OF THE B-SERIES
The system shown is the B950R with the optional vertical lift. While there are slight differences between each model, this drawing is representative of the basic system layout.
SPECIFICATIONS
| |
Model B452R |
Model B950R |
Model B1950R |
Model B3550R |
| Working dimensions |
10"X12"X8"D |
12"X16"X12" |
16"X20"X14.5" |
20"X24"X17" |
| Boil sump heat |
2000 immersion heat |
4000 immersion heat |
8000 immersion heat |
14000 immersion heat |
| Ultrasonic heat |
400W |
1000W |
1500W |
2000W |
| Ultrasonics* |
250W@40 kHz std |
500W@40 kHz std |
1000W@40 kHz std |
1500W@40 kHz std |
| Distillation rate** |
7 gph |
14 gph |
28 gph |
49 gph |
| Recirculation |
1 gpm @ 10 µ |
2 gpm @ 10 µ |
4 gpm @ 10 µ |
6 gpm @ 10 µ |
| Load capacity** |
200lbs.steel/hr |
400lbs.steel/hr |
800lbs.steel/hr |
1400lbs.steel/hr |
| Vapor zone |
28.7"L X 15.2"W X 8.5"D |
32.7"L X 19.2"W X 12"D |
40.7"L X 23.2"W X 14.5"D |
48.7"L X 27.2"W X 17"D |
| Control voltage |
24 volts |
24 volts |
24 volts |
24 volts |
| Solvent capacity |
9.2 gallons |
26 gallons |
50 gallons |
82 gallons |
| Overall |
54.7" X 28.5" X 46" |
64.7"X 32.5" X 48.7" |
89.5" X 36.5 " X 60" |
110" X 40.5 " X 68" |
| Input power |
208 or 230V 3f 27A |
208 or 230V 3f 39A |
208 or 230V 3f 62A or 460, 3f
33A option |
208 or 230V 3f 81A or 460, 3f
42A option |
| Shipping weight |
500lbs. with pallet |
750lbs. With pallet |
1000lbs. With pallet |
1500lbs. With pallet |
* Higher frequencies available upon request
**Based on HCFC, HFE, and HFC solvents. Specifications subject to change without notice
|
|
|
|
|
|
|
|
|
