 |
|
|
|
|
 |
|
 |
OVERVIEW
The Branson FlexLine 1216 Cleaning System is a cost-effective modular
ultrasonic cleaning, rinsing and drying system. The equipment
incorporates quality materials and workmanship without unnecessary
extras. It offers more features and capabilities than tabletop units
and greater flexibility than fixed-configuration console units.
The basic component of the FlexLine Series is a standard 316 stainless
steel tank with protective skirting. This base tank can be configured
in a variety of ways for:
- Immersion ultrasonic cleaning or rinsing
- Ultrsonics at 20, 25, 40, 80,120, or 170 kHz
- Weir overflow
- Spray under immersion
- Surface sparging
- Spray rinsing
- Overflow rinsing
- Cascade rinsing
Based on standard components, a system can be easily designed and
quickly delivered. Should production processes change, the equipment is
easily modified.
FEATURES & BENEFITS
- Maximum flexibility
- Cost-effective design
- Available for quick delivery
- Broad range of pre-engineered configurations
- Stands to bring tanks to working height
- Overflow weir standard in all tanks
- Stainless steel covers and drain backs
- Durable 316 stainless steel construction
SPECIFICATIONS:
| Overall module dimension: |
23"x21"x36"H |
| Working tank size: |
12"x16"x15"D |
| Wash tank temperature: |
70° F to 160° F |
| Optional pump flow rate: |
1-3 gpm |
| Spray/sparger nozzles: |
6/bar |
| Filter retention: |
10m standard (others available) |
| Ultrasonic output: |
750W per tank |
| Inlet size: |
1/2" NPT |
| Drain size: |
1" NPT |
| Input power: |
230 volt, 50/60 Hz, 1 phase |
OVERVIEW
The Branson FlexLine 2024 Cleaning System is a cost-effective modular
ultrasonic cleaning, rinsing and drying system. The equipment
incorporates quality materials and workmanship without unnecessary
extras. It offers more features and capabilities than tabletop units
and greater flexibility than fixed-configuration console units.
The basic component of the FlexLine Series is a standard 316 stainless
steel tank with protective skirting. This base tank can be configured
in a variety of ways for:
- Immersion ultrasonic cleaning or rinsing
- Ultrasonics at 20, 25, 40, 80, 120, or 170 kHz
- Weir overflow
- Spray under immersion
- Surface sparging
- Spray rinsing
- Overflow rinsing
- Cascade rinsing
Based on standard components, a system can be easily designed and
quickly delivered. Should production processes change, the equipment is
easily modified.
FEATURES & BENEFITS
- Maximum flexibility
- Cost-effective design
- Available for quick delivery
- Broad range of pre-engineered configurations
- Stands to bring tanks to working height
- Overflow weir standard in all tanks
- Stainless steel covers and drain backs
- Durable 316 stainless steel construction
SPECIFICATIONS
| Overall module dimension: |
31"x26"x36"H |
| Working tank size: |
20"x24"x23"D |
| Wash tank temperature: |
70° F to 160° F |
| Optional pump flow rate: |
1-3 gpm |
| Spray/sparger nozzles: |
10/bar |
| Filter retention: |
10m standard (others available) |
| Ultrasonic output: |
1500W per tank |
| Inlet size: |
1/2" NPT |
| Drain size: |
1" NPT |
| Input power: |
230 volt, 50/60 Hz, 1 phase |
OVERVIEW
Flexline Dryers incorporate design features to facilitate cost
effective water removal. They have been developed from an enduser point
of view - quality, reliability and serviceability are all designed in.
Room air is heater to expand its moisture-carrying capability and
recirculated to extract liquids from parts following precision cleaning
operations.
DESIGNED FOR EFFICIENCY
Flexline Dryers can heat air from ambient to 200°F as required by specific application. This hot air can be recirculated at rates up to 550 cfm to assure dry parts in the shortest possible time.
The entire process is Programmable Logic Controller (PLC) managed for precise drying and process repeatability and there is a built-in interface for linear material handling equipment.
FEATURES & BENEFITS
- Chamber sizes are 12" x 16" or 20" x 24"
- Wide temperature range from ambient to 200°F to accommodate different types of applications
- High volume airflow up to 550 cfm to quickly and effectively remove all moisture
- All stainless steel construction for durability
- low-loss air duct design to optimize flow
- High response heater elements
OPTIONS
- Power cover with releasable hinge for operator safety
- Pneumatic or Electric
- Digital temperature controller/readout
|
|
|
|
|
|
|
|
